1 - Choose an area to insulate
2 - Enter an R-value or a thickness, then the area, the density and the desired % of extra.
R-value
R (ft²·°F·h / BTU)
Thickness
in
Area
ft²
Density
lb/ft³
Extra
% extra
| Zone | Minimum | Recommended | Note |
|---|---|---|---|
| Attic | 1.52 lb/ft³ | 1.52 lb/ft³ | Loose-fill blowing — PROFIB CELL reference density |
| Floor-ceiling | 1.87 lb/ft³ | 2.5–3.5 lb/ft³ | Dense-pack recommended between two floors (acoustics + anti-settling) |
| Wall | 1.87 lb/ft³ | 3.0–3.5 lb/ft³ | Dense-pack in closed cavities to prevent settling |
3 - Number of PROFIB CELL bags required
—
bags minimum
⚠ Values of R-70 and up are extrapolated — check with the manufacturer before ordering.
⚠ Density below the recommended minimum for this application — risk of settling.
Based on the official PROFIB CELL coverage chart. The number of bags is adjusted in proportion to the chosen density relative to the reference density. Check quantities with the manufacturer for dense-pack applications.