EXTERIOR/INTERIOR
Keep above freezing TESCON RP primer must be kept above freezing at all times, including when it arrives on site before application. Delivery trucks often leave packages outside without asking for a signature. Keep track of your delivery's estimated arrival and avoid leaving it outside in freezing conditions. Inspect the product immediately after delivery to make sure nothing has frozen.
Use
Prepares substrates for better adhesion. A primer for wood, OSB, plywood, fibreboard, brick, concrete, roofs, walls and floors that prepares the substrate for bonding Pro Clima tapes and CONTEGA HF/LINE adhesive.
Benefits
- Saves time, no drying needed: tapes can be applied right after priming porous substrates.
- Penetrates deep into the substrate and strengthens it.
- Solvent-free
- Meets Living Building Challenge criteria - Red List free
- Fast drying
- Can be combined with all Pro Clima tapes and adhesives.
Substrates
- A primer for wood, OSB, plywood, fibreboard, brick, concrete, roofs, walls and floors.
Properties
- Material: acrylic copolymer
- Application temperature: -10 °C to 45 °C (15 °F to 113 °F)
- Must be stored above 0 °C or 32 °F (frost-free)
Dimensions
1.0 litre (34 oz) bottle
Yield per bottle by tape width: 2 3/8" wide - 246' (75 m) of coverage,
3" wide - 195' (60 m) of coverage
6" wide - 98' (30 m) of coverage
Contact us
Planning a construction project?
Whether it's a residential or commercial project, send us your plans to get an estimate for your building materials.